adjustment is not necessary on most F2 and F3 mounts some dealers like
the ability to set this stow zero position.
The XF mounts actually have both Electronic Azimuth Zero sensors and
mechanical Azimuth Stall position. The XF Electronic Zero position is
very close to where mechanical stowed zero location is on the mounting
plate. The XF allows the Dish to search and peak at Electronic zero
because the mechanical stall is -2.5 degrees lower. It is not necessary to
make any adjustments to this setting on the XF mounts.
Elevation Origin (3)
After a Dish Calibrate the D3 will set Elevation Origin to approximately 3
degrees.
What this means is when the motor counts reach zero the F1, F2, or F3
have seen a mechanical stall in the Stowed position. From this stalled
position the mount is about 3 degrees higher than a level (horizontal) stow.
After a Search and Peak on the Target Satellite this value may change +/-
several degrees. This automatic adjustment will now set the true
horizontal stow value of the mount. This now means that when a search
elevation value is determined by the D3, the D3 will move very close to
the correct value to find the Target Satellite on the first search pass.
It is recommended that this value not be adjusted after a successful Target
Satellite Search and Peak.
Skew Origin (0) F1 (-96) F2/3 XF2/3
This value is different on all mounts. On the F1 it is approximately 468
Counts for Zero degrees Skew after a Dish Calibrate is performed. On an
F2 or F3 mount 0 Counts is approximately -96 degrees after a Dish
Calibrate is performed.
However once a Dish has found and peaked the Target Satellite and the
Ready Light has illuminated this value will be corrected automatically
after ACP has completed. (ACP must be in Medium or High Mode.)
It is recommended that this value not be adjusted if ACP Isolation was
performed in Medium or High mode.
Minimum Search Angle (17)
This is the lowest Satellite Look Angle allowed by the D3 Controller when
in search mode. From the factory the D3 is set with an angle of 17
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels